Presenting energy-efficient and essentially silent range of air conditioning and ventilation products for commercial, industrial and residential applications. These products are bound to provide the inside conditions, just perfect to suit your facility's needs.

Choose to be happy. Choose your air.

Ductable Splits
errow  Air Handling Units
   Ductable Splits
   Floor Mounted AHU
   Clean room/Pharmaceutical AHU
   Treated Fresh Air Units
errow  Fan Coil Units
errow  Air washers
errow  Exhaust Blower Units
errow  Kitchen Ventilation System
errow  Heat Transfer Coils
errow  Heating Units
errow  Condensers & Chillers
errow  Air Curtains
These units are specifically designed for low-height applications and are suspended from ceiling of the structure. The compact design ensures easier installation at sites with space constraints. Supplied in both direct-drive and belt-drive models, these units are a silent solution to the modern day structures such as shopping malls, restaurants, apartments and offices etc. The units are ducted to cover the entire area to be conditioned.  
RANGE : 1200 CFM to 8000 CFM. 
FRAME : Extruded Aluminum profile and 3D nylon corners etc.
CASING  : 23 ± 2 mm thick, double skin panels made of 0.6 mm sheets with high density Poly Urethane Foam (PUF) injected between the two skins.  
COOLING COILS : Chilled water type / DX type with Copper pipe and Aluminum fin.  
FILTERS   : Synthetic, cleanable pre filters.  
DRAIN PAN : Dual pan with sandwiched insulation. 
MOUNTING   : GSS mounting brackets.  
BLOWERS : Aluminum, DIDW type, forward curved, centrifugal.  

ISI marked, Single phase, split capacitor type.

BLOWERS : AMCA certified DIDW type, forward curved, centrifugal twin-blower assembly.  
MOTORS : TEFC type, Three phase motors of standard make.  
LOW HEIGHT :  To ensure easier accommodation into areas with space constraint, generally above the false ceiling.  
DOUBLE SKIN CASING :  Higher efficiency and low noise.  
VIBRATION ISOLATORS :  The motors in the direct driven models are mounted on vibration-absorbing rubber bushes and the belt drive units are provided with blower-motor assembly mounted on vibration isolators to make the units vibration free.  
BOTTOM ACCESS :  Access door is provided at bottom for easier maintenance. 
GASKET SEALED PANELS   :  Low leakage and quiet operation is ensured by using high quality gasket to seal the panels, doors etc.  
DUAL DRAIN PAN :  Ensures that there is no condensate developing on the unit body.  
APPLICATIONS :  Malls, Shopping plazas, Hotels, Restaurants, Offices, Clubs, Banks, Auditoriums etc.
OPTIONAL :  S.S. Drain pan, Volume Control Dampers.